The brain has evolved to effectively control the body, and in order to understand the relationship we need to model the sensorimotor transformations underlying embodied control. As part of a coordinated effort, we are developing a general-purpose platform for behavior-driven simulation modeling high fidelity behavioral dynamics, biomechanics, and neural circuit architectures underlying embodied control. We present a pipeline for taking kinematics data from the neuroscience lab and creating a pipeline for recapitulating those natural movements in a biomechanical model. We implement a imitation learning framework to perform a dexterous forelimb reaching task with a musculoskeletal model in a simulated physics environment. The mouse arm model is currently training at faster than 1 million training steps per second due to GPU acceleration with JAX and Mujoco-MJX. We present results that indicate that adding naturalistic constraints on energy and velocity lead to simulated musculoskeletal activity that better predict real EMG signals. This work provides evidence to suggest that energy and control constraints are critical to modeling musculoskeletal motor control.

Surface Electromyography (sEMG) provides vital insights into muscle function, but it can be noisy and challenging to acquire. Inertial Measurement Units (IMUs) provide a robust and wearable alternative to motion capture systems. This paper investigates the synthesis of normalized sEMG signals from 6-axis IMU data using a deep learning approach. We collected simultaneous sEMG and IMU data sampled at 1~KHz for various arm movements. A Sliding-Window-Wave-Net model, based on dilated causal convolutions, was trained to map the IMU data to the sEMG signal. The results show that the model successfully predicts the timing and general shape of muscle activations. Although peak amplitudes were often underestimated, the high temporal fidelity demonstrates the feasibility of using this method for muscle intent detection in applications such as prosthetics and rehabilitation biofeedback.

Abstract--Time-efficient estimation of muscle activations and forces across multi-joint systems is critical for clinical assessment and assistive device control. However, conventional approaches are computationally expensive and lack a high-quality labeled dataset for multi-joint applications. T o address these challenges, we propose a physics-informed deep learning framework that estimates muscle activations and forces directly from kinematics. The framework employs a novel Multi-Joint Cross-Attention (MJCA) module with Bidirectional Gated Recurrent Unit (Bi-GRU) layers to capture inter-joint coordination, enabling each joint to adaptively integrate motion information from others. By embedding multi-joint dynamics, inter-joint coupling, and external force interactions into the loss function, our Physics-Informed MJCA-BiGRU (PI-MJCA-BiGRU) delivers physiologically consistent predictions without labeled data while enabling time-efficient inference. Experimental validation on two datasets demonstrates that PI-MJCA-BiGRU achieves performance comparable to conventional supervised methods without requiring ground-truth labels, while the MJCA module significantly enhances inter-joint coordination modeling compared to other baseline architectures.

Muscle force sharing is typically resolved by minimizing a specific objective function to approximate neural control strategies. An inverse optimal control approach was applied to identify the "best" objective function, among a positive linear combination of basis objective functions, associated with the gait of two post-stroke males, one high-functioning (subject S1) and one low-functioning (subject S2). It was found that the "best" objective function is subject- and leg-specific. No single function works universally well, yet the best options are usually differently weighted combinations of muscle activation- and power-minimization. Subject-specific inverse optimal control models performed best on their respective limbs (\textbf{RMSE 178/213 N, CC 0.71/0.61} for non-paretic and paretic legs of S1; \textbf{RMSE 205/165 N, CC 0.88/0.85} for respective legs of S2), but cross-subject generalization was poor, particularly for paretic legs. Moreover, minimizing the root mean square of muscle power emerged as important for paretic limbs, while minimizing activation-based functions dominated for non-paretic limbs. This may suggest different neural control strategies between affected and unaffected sides, possibly altered by the presence of spasticity. Among the 15 considered objective functions commonly used in inverse dynamics-based computations, the root mean square of muscle power was the only one explicitly incorporating muscle velocity, leading to a possible model for spasticity in the paretic limbs. Although this objective function has been rarely used, it may be relevant for modeling pathological gait, such as post-stroke gait.

Like prisoners in Plato's cave, neural networks for human motion understanding often rely on indirect

Musculoskeletal disorders (MSD) are the most common cause of work-related injuries and lost production involving approximately 1.7 billion people worldwide and mainly affect low back (more than 50%) and upper limbs (more than 40%). It has a profound effect on both the workers affected and the company. This paper provides an ergonomic assessment of different work activities in a horse saddle-making company, involving 5 workers. This aim guides the design of a wrist exoskeleton to reduce the risk of musculoskeletal diseases wherever it is impossible to automate the production process. This evaluation is done either through subjective and objective measurement, respectively using questionnaires and by measurement of muscle activation with sEMG sensors.

Balance control is important for human and bipedal robotic systems. While dynamic balance during locomotion has received considerable attention, quantitative understanding of static balance and falling remains limited. This work presents a hierarchical control pipeline for simulating human balance via a comprehensive whole-body musculoskeletal system. We identified spatiotemporal dynamics of balancing during stable standing, revealed the impact of muscle injury on balancing behavior, and generated fall contact patterns that aligned with clinical data. Furthermore, our simulated hip exoskeleton assistance demonstrated improvement in balance maintenance and reduced muscle effort under perturbation. This work offers unique muscle-level insights into human balance dynamics that are challenging to capture experimentally. It could provide a foundation for developing targeted interventions for individuals with balance impairments and support the advancement of humanoid robotic systems.

--Back exoskeletons can reduce musculoskeletal strain, but their effectiveness depends on support modulation and adaptive control. This study addresses two challenges: defining optimal support strategies and developing adaptive control based on payload estimation. We introduce an optimization space based on muscle activity reduction, perceived discomfort, and user preference, constructing functions to identify optimal strategies. Experiments with 12 subjects revealed optimal operating regions, highlighting the need for dynamic modulation. Based on these insights, we developed a vision-based adaptive control pipeline that estimates payloads in real-time by enhancing exoskeleton contextual understanding, minimising latency and enabling support adaptation within the defined optimisation space. V alidation with 12 more subjects showed over 80% accuracy and improvements across all metrics. Compared to static control, adaptive modulation reduced peak back muscle activation by up to 23% while preserving user preference and minimising discomfort. These findings validate the proposed framework and highlight the potential of intelligent, context-aware control in industrial exoskeletons. Musculoskeletal disorders are a growing concern in industrial workplaces, where workers in construction sites, production, logistics, and others who regularly lift heavy loads face significant risks. To address these issues, back support exoskeletons (BEs) have been developed, aiming to reduce muscular activation and spinal loadskey contributors to back impairment [1]-[4]. Over the past few decades, advancements in the design of active BEs have improved their kinematic compatibility, reduced their weight, enhanced their acceptability, and proposed innovative designs [5]-[9].

Anchor point placement is a crucial yet often overlooked aspect of exosuit design since it determines how forces interact with the human body. This work analyzes the impact of different anchor point positions on gait kinematics, muscular activation and energetic consumption. A total of six experiments were conducted with 11 subjects wearing the XoSoft exosuit, which assists hip flexion in five configurations. Subjects were instrumented with an IMU-based motion tracking system, EMG sensors, and a mask to measure metabolic consumption. The results show that positioning the knee anchor point on the posterior side while keeping the hip anchor on the anterior part can reduce muscle activation in the hip flexors by up to 10.21\% and metabolic expenditure by up to 18.45\%. Even if the only assisted joint was the hip, all the configurations introduced changes also in the knee and ankle kinematics. Overall, no single configuration was optimal across all subjects, suggesting that a personalized approach is necessary to transmit the assistance forces optimally. These findings emphasize that anchor point position does indeed have a significant impact on exoskeleton effectiveness and efficiency. However, these optimal positions are subject-specific to the exosuit design, and there is a strong need for future work to tailor musculoskeletal models to individual characteristics and validate these results in clinical populations.